Well Point Pumps

During a construction site dewatering it is key to have the best well point pump for controlling the groundwater table. The PT series wellpoint and sock dewatering pumps are the best choice around for ensuring a dry construction pit. These pumps are typically supplied diesel driven and with a sound attenuated canopy. Video set up well point system.

The perfect choice 

• Impressive suction lift with a vacuum up to 32 feet
• Very low maintenance thanks to service intervals of up to 1500 hours
• High fuel efficiency with a maximum of 0.4 gallon/hour on the PT150 well point pump
• Extended working life the PT pump will still be going strong decades after purchase

How a well point dewatering pump works 

The PT well point pumps are positive displacement pumps and fully self-priming. They can cope with any combination of air and water, with no need for a separate priming system. As soon as the pump is attached to a well point dewatering system, you just need to start the engine and you can head off home. The pump produces a vacuum via the header pipe and starts to reduce the groundwater level. Watch the Dutch dewatering video to discover for yourself the lowest cost method for creating a perfectly dry construction pit.

Groundwater control through sock dewatering 

Here a long drainage pipe is dug horizontally into the ground. BBA Pumps products drive the operation above ground. From flow meters, non-return valves, weir tanks to pipelines and of course the PT sock dewatering pumps.

Contact us now to learn more or request a free quotation.